Performance Marine Hardware & Speed Equipment • Tel: 909-476-0335 Fax: 909-259-7884 E-mail: sales@rexmar.com

Search by Brand Search by Product Mike's Corner, Races, Photos, Events Online Sale Discount Items

Store Front  Account  Basket Contents  Checkout 
Quantity in Basket: 0


Contact Us / Hours
Legal Info
Search By Brand
Search By Product
Return Policy
Shipping Policy
Warranty Policy
Colors & Anodize vs Perma-Coat
Mike's Corner, Race & Event Coverage

Rex Marine
Catalog Website
Contact Us
Copyright
Return Policy
Shipping Policy
Warranty Policy

 
 
Follow us...
facebook twiter


Please use Scroll Bar at right to scroll down and see all Rex Anodize and Perma-Coat Colors>>>>

Polished Finish
Anodized Pewter
Anodized Purple
Anodized Blue
Anodized Gold
Anodized Red
Anodized Black
Perma-Coat Purple
Perma-Coat Blue
Perma-Coat Red

Anodize vs. Powder Coat ?

We get many questions from our customers on which is the best. The fact is, both have strengths and weaknesses. We’ll talk a little about anodize first, since it’s been around for decades. Anodize is an electrical plating process which actually penetrates the surface of aluminum. It creates a very hard protective surface layer when applied properly. First of all, there is good anodize and there is the not so good anodize. The difference between the two can come from several causes. Most of the complaints in the boating world are with regards to anodize color fade. The color in anodized parts is created by dyeing a part in a special dye, after the actual anodize process is done. A sealing process then follows. Several things can contribute to premature color fade; poor quality dye or old weak dye, poor or weak sealer after the dye process, or a weak initial anodize itself. Quality of dye, chemicals, plating time, and the experience of the technician that performs the plating all are critical factors in achieving good results.

At Rex Marine, we use the best plating facility where the technicians know what the concerns are with anodize for marine use. Prematurely faded parts are very rare from us. We perform actual sunlight colorfast testing regularly on actual production parts to ensure we are getting consistent high quality plating. (The UV in sunlight is the main culprit that attacks anodize color). We also perform side-by-side tests on parts made by competitors. The results are often quite different. We’ve seen some parts turn almost colorless in less than a month outdoors. Unfortunately, the reputation of anodize often suffers because many people don’t realize there’s a big difference in quality. It’s important to note that purple and red anodize dyes both have relatively low colorfast ratings and will fade much faster than the other colors.

Now a little on Powder Coat. It’s very important to realize that powder paint has strong characteristics as well as weak ones just as anodize does. Powder Coat encompasses a broad family of paint products which are applied in dry powder form to electrically charged metal objects and then baked on at high temperature. As paint goes, it is very durable. Powder Coat finishes come in a wide range of quality and colors. While some powder coatings are very tough and durable, others perform and look quite poor. A number of marine part suppliers market powder coated billet products under a number of different trade names. We’ve tested many coatings which failed, flaked off, chipped easily, and just generally looked bad, and we’ve tested some that perform and look quite good. With this testing process we’ve determined which paints work well, adhere well, while at the same time look good. We feel we have now found the best quality coatings available for marine use. We are now offering these coatings on many of our billet hardware products under the name “Perma-coat”.

A Comparison - In the Marine Environment

Colors -

Anodize - Basic bright colors available

Powder Coat - More selection of colors including white and some that have a deep candy luminescence

Fade -

Anodize - When properly applied, normal fade will take several years to occur to a level where a part looks poor. However, when improperly applied and even with certain colors applied properly, fading can occur very rapidly. Purple and Red dyes
typically have the worst fade properties of the colors available.

Powder Coat - Very resistant to fade. Also, can be color sanded like most standard paints to remove surface imperfections or
oxidation that may naturally occur over time.

Durability -

Anodize - Very tough, can be scratched with a hard sharp blow but will not chip or flake after an initial surface intrusion. Salt water will still eat away at any exposed scratched metal, however.

Powder Coat - Very tough for paint, but no match for anodize in this area. After an initial chip, corrosion may set in, rapidly causing additional paint separation. Corrosion can also start at any area of a part that is not painted well (like the back side) or at any point on a part that normally rubs or wears (such as a hinge). We hesitate to recommend even our Perma-Coat for salt water applications for this reason.

Finish -

Anodize - Excellent when applied to a high quality polished surface.

Powder Coat - Some colors are excellent, while others inherently tend to have varying amounts of orange peel. This orange peel can be color sanded out in many cases however, if a person spends the time to do it. Also, like any paint, any dirt
introduced in the painting process shows up as irregularities in the surface, and from our experience an absolute dust-free part is quite rare.

Its not our objective here to sway anyone either way - Just to give you the facts. We offer both finishes, therefore we have no benefit in pushing one process over the other. We feel that both have their place in the custom boat market. Each individual needs to choose based on the facts and their own preference of color choice, resistance to fading, anti-corrosion properties, etc.. There is advertising present in the marketplace which is very slanted toward one process over the other, primarily from competitors who only offer one type of finish. This advertising typically exposes only the weak points of the process not offered and only the strong points of the process they have. We feel you ought to be aware of the positives and negatives of both finishes. We hope this information helps you make a knowledgeable and informed choice in both your billet hardware selection, and also whom you choose to be your supplier.

All Images, Text & Design Components of this website are © Rex Marine Corporation

We accept the following credit cards.
Store Front | Account | Basket Contents | Checkout | Featured Products | Online Sale Discount Items facebook twitter
All Images, Text & Design Components of this web site are © Rex Marine Corporation • Tel 909-476-0335 Fax 909-259-7884 • sales@rexmar.com