Aluminum Rub Rail .625 wide, Clear Anodized
146 inch length (this rub rail has a rack mark on each end that is designed to be cut off so you have 144" of clean material)
Shipping for Rub Rail, Molding, & Trim
It is our goal to obtain the best possible freight prices for our customers. We work with several carriers and will come up with the best freight quote for you based upon your location.
Most of these rub rails and moldings come in approx. 12 or 20 foot lengths. Due to their length the majority must be shipped by truck freight. Whenever possible we roll flexible vinyl products so that they can be shipped via UPS saving some freight costs. This must be addressed on a case-by-case basis as the type and quantity of vinyl determine our ability to do so.
Many areas of California, Arizona, Nevada, Utah, Oregon, or Washington are served by On-Trac. If you are located in one of their service areas, freight can be as low as the $50-100 range per tube. If you have the ability to receive your product at a commercial address vs. a residential address, you can lower your freight costs slightly.
Freight to other parts of the country typically run in the $150 - 250 range per tube. Again, this is merely a guideline and we will give you a firm freight quote to your location.
In addition to freight charges there are packaging charges for shipped rub rail, molding, and trim. 12 foot tubes cost $17.55. Each order is packed in a cut-to-length rigid PVC tube and secured with rigid end caps to protect your product. If you pick up your product at our location without the shipping tube these charges do not apply.
Shipping (unless you arrange your own) and handling charges will always be added to your order total before shipping.
Every situation is different and we encourage you to call us at 909-476-0335 with your address and delivery information before your order. We will work to get you the best freight deal possible.